Olympus OM-2 - Mounting the Lens;Inserting the Batteries

MOUNTING THE LENS
Mount the Lens.
Turn the lens clockwise until the lens release button springs
up and you will hear a positive " click" .
CAUTION: Do not apply pressure to the lens release but·
ton during the mounting procedure to assure proper coupl ·
ing between the lens and the meter .
Lens Removal
To detach the lens, press down on the lens release button
and turn the lens counter · clockwise .
CAUT ION: Always attach the front and rear lens caps
when the lens is removed from the body to prevent any
possibility of damage .
7
INSERTING THE BATTERIES
Insert two 1. 5V silver oxide batteries [Eveready or (UCAR)
S·76, EPX-76 or equivalents] into the battery chamber.
CAUTION : Batteries should be always replacec;:l by twos .
These batteries are used as a power source for the built · in
exposure meter (MANU AL) and the automatic exposure
control (AUTO) . If battery polarity is i ncorrect , the camera
does not function .
YES NO NO NO
~i~~~~
00@8
0808