Olympus OM-2 - Motor Drive Group Units

~~ M _ O ~ TO ~ R ~ DR ~ I ~ VE ~ G _ RO _ U _ P _ U _ N ~ I _ TS ~~~~ __ ~ ________ ~I ~
• Winder 1 (with M. 6V Battery
Holder 1)
Fixed directly to the camera base tripod
socket. the Winder 1 functions integral·
Iy with . the OM camera body to perform
single frame shooting .
The unit winds the film in approx . 0 .3
sec. as soon as the exposure is made,
whenever the shutter release is pressed .
Operating on self-contained 4 AA Alka -
line batteries, it is capable of powering
approx. 50 rolls of 36-exposure film .
Size: 130 X 64 X 100mm (5.12 X 2.52
X 3.94 in.) Weight : 290g (10 .2 oz .)
(less
batteries)
• M. 6V Power Pack 1
This pocketable power unit (4 AA
batteries) connects to the Winder 1 via"
"-
• Motor Drive 1
Th e basic motor drive unit that forms
the foundation of the group. Fixed
directly to the camera base tripod sock -
et together with the power supply , it
functions integrally with the OM cam -
era body. Operating on various power
sources such as penlight batteries, Ni -
Cd batteries, or AC, it is capable of sin -
gle frame shooting and sequential film-
ing of 5 frames per second .
Size: 116 X 82 X 66mm (4.57 X 3.23
X 2.59 in.) Weight : 210g (7 .4 oz.)
a 1. 2m cord. Warmed by photographer's
body heat, permits operation in
temperatures as low as _ 10 ° C (14°F).
62
• M. 18V Control Grip 1
(with M. 18V Battery Holder 1)
A power supply that accepts 12 AA
Alkaline or Ni · Cd batteries. Can be at -
tached quickly to the Motor Drive 1.
Complete with a built - in release but -
ton, single and sequence se le ctor
switch and release lock lever.
Size: 136 X 87 X 32mm , Weight: 160g
(less batteries)
• M.15V Ni-Cd Control Pack 1
This is a flat - type rechargeable power
unit equipped with a special built · in
Ni - Cd battery to power the Motor
Drive 1, and provides maximum con -
tinuous filming rate of 5 f . p.s . as well
as the single release capabi l ity.
Size: 129 X 35 X 67mm, Weight: 260g