Olympus SP-565UZ - Switching between the monitor and viewfinder; Changing the shooting information display

Switching between the
mQnitor and viewfinder ..............................................
Both the monitor and viewfinder are available to
compose a shot. There may be cases where the
monitor is difficult to see due to bright tight being
reflected on it while shooting under a clear sky.
In such cases, use of the view finder is helpful
when composing a shot.
Changing the shooting
The display of the screen information can be
changed to best match the situation, such as
clearing the view of the screen or for creating
a presicse compostion by the use of the grid
display.
Press the DISE button.
• The displayed shooting information changes in
the order shown below each time the button is
pressed. "Shooting mode display" (p. 8)
Normal Histogram
Press the IC)I button.
• Each time the button is pressed, the camera
display switches between the monitor and the
viewfinder.
To view clearer images through the
viewfinder
Turn the diopter adjustment dial while
looking through the viewfinder until the
viewfinder display appears sharp.
tOI button
Diopter
adjustment dial
Viewfinder
No information Grid
[FRAME ASSIST] (p. Sl),
[_ (Histogram)] (p. 61)
Reading a histogram
If the peak fills too much of the frame,
the image will appear mostly white.
If the peak fills too
much of the frame,
the image witl
appear mostly black.
The green section shows
the luminance distribution
within the center of the
screen.
ENi:_:::!:!_!:!i_25_!i_!i_!i_!i_!i_!i_!i_!i_!i_!i_!i_!i_!i_!i_!i_!i_!i_!i_!i_!i_!i_!i_!i_!iB_
....,,===========s_