Olympus SP-565UZ - Registering a set of shooting settings under my mode labels [MY MODE SETUP]

Registering a set of shooting settings under my mode labels [MY MODE SETUP]
......._T8ETUR_ ........
(_ By referring to the "Application" column, select the registration method (submenu 2) and the desired
my mode label (submenu 3) and then adjust any settings.
_ SET/CAN _ selected[SET]setsmythemodecurrentlabetmenu(_l/_2/Ey_3/_4 ).function settings to the
_2 MY MODE 2/ RESETiC N E [RESET] returns the functions in the selected my
RESET _3 MY MODE 3/ ..............................mode label to their defaults.
_4 MY MODE 4 (Register functions The user can make any changes to a selected my
CUSTOM
individually) mode label setting.
_ When [CUSTOM] is selected, available function settings for the my mode registrations are follows;
• [P/A/StM/SCENE] (p. 17 to 20) • [DRIVE] (p. 34) * [_] (p. 39)
• [F_] (p. 23) • [FINE ZOOM] (p. 35) * [PICTURE MODE] (p. 39)
• [FNo.] (p. 17,18) • [DIGITAL ZOOM] (p. 35) * [SHARPNESS] (p. 39)
• [SHUTTER] (p. 17,18) • [METERING] (p. 35) * [CONTRAST] (p. 40)
• [FLASH MODE] (p. 22) •[AF MODE] (p. 36) *[SATURATION] (p. 40)
• [_i_] (p. 24) • [FOCUS MODE] (p.36) * [NOISE REDUCT.] (p. 40)
• [_)] (p. 24) • [FULLTIME AF] (p. 37) * [TIMELAPSE] (p. 41)
• [_!:] (p. 22) * [AF PREDICT] (p. 37) * [_3] (p. 4t)
• [MONITOR] * [AF ILLUMINAT,] (p. 37) * [INFO] (p. 25)
• [ZOOM] * [IMAGE STABILIZER] (p. 37) * [FRAME ASSIST] (p, 61)
• [IMAGE QUALITY] (p. 31) * [_] (p. 38) * [_] (p. 61)
• [WE] (p. 32) * [_ FLASH] (p. 38)
• [ISO] (p. 33) * [_] (p. 39)
To select the display device used at
camera startup [MONITOR]
Select [CUSTOM] (submenu 2) • desired
my mode label (submenu 3) • [MONITOR]
(submenu 4), and then the display device
that shows the saved image or shooting
standby screen ([LCD] or [EVF]).
To select the zoom position at camera
startup [ZOOM]
Setect [CUSTOM] (submenu 2) • desired
my mode tabet (submenu 3) • [ZOOM]
(submenu 4), and then a preset focal tength
(angle of view) ([26mini, [50mini, [150mini,
[300ram] or [520mm]).
_ The focai length selected by [ZOOM] is
based on the equivalent value for 35ram
cameras.
To select the information display at
camera startup [INFO]
Setect [CUSTOM] (submenu 2) • desired
my mode tabet (submenu 3) • [INFO]
(submenu 4), and then the desired
information display format at camera
startup ([OFF] (startup the camera with no
information], [ON] (startup the camera with
normal display), [FRAME ASSIST] (startup
the camera with grid) or [_] (startup the
camera with histogram)). "Changing the
shooting information display" (p. 25)
iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii_!i_62!i_!i!!i!i_i!!i_EN