,3j Compose the second shot so that the
joint area overlaps the guide frame.
Composition of the 2nd frame
Press the shutter button to take the
second frame.
To combine only two pictures, press the
button before taking the third frame.
5_ Take the third frame in the same way as
steps _to _.
• After the third frame is taken, the camera
automatically processes the frames and the
combined panoram image is displayed.
_ To cancel a panoramic picture during
shooting, press the MENU button.
Taking pictures with [COMBINE IN PC]
Use _-_2_(,'_/[_)to select the direction that
the frames are combined.
2 Press the shutter button to take the first
frame, and then compose the second
shot.
• Composethe shotusingtheguideframeso
thatthetwoadjacentframesoverlap.
3_ Repeat step 2 untit the number of
required frames are taken, and then press
the _ button when done.
_ When the [_1 mark is displayed, you cannot
continue shooting any further.Panorama
shooting is possible for up to 10frames.
{J_ Refer to the OLYMPUSMaster 2 help guide
fordetails on how to create panoramic
images.
Restoring the shooting functions to the
default settings [.__ RESET]
........,_ RESEI
_: _ PAS M _ SCN
Restores the following menu functions
to the default settings.
• SHADOWADJ (p. 22)
• Flash (p. 22)
• Exposure compensation (p. 23)
• Macro (p. 24)
YES • Self-timer (p. 24)
• [_-IMAGE QUALITY] (p. 31)
• [_J& SCN] (p. 42)
• Menu functions in [It_ CAMERA
MENU] (p. 31 to 47)
• Switching between the monitor and
viewfinder (p. 25)
_ The current settings are not changed.
To Next Page
Loading...
