OLYMPUS Master 2
System requirements and
installation of OLYMPUS
........Master2 ........................................................................................
Install the OLYMPUS Master 2 software
referring to the included instalation guide.
Connecting the camera to a
....computer
Make sure the camera is turned off.
• The monitor is off.
• The lens is retracted.
2 Connect the camera to a computer.
• The camera automatically turns on.
Locate the position of the USB port by
referring to your computer instructions
manual.
3 Use _ to select [PC], and press
the _ button.
• Thecomputerautomaticallydetectsthecameraas
a newdeviceon thefirstconnection.
Windows
After the computer detects the camera, a
message indicating the completion of the
setting appears. Confirm the message and
click "OK". The camera is recognized as a
removable disk.
Macintosh
When iPhoto starts, exit iPhoto and start
OLYMPUS Master 2.
_ While the camera is connected to the
computer, shooting functions are disabled.
_ Connecting the camera to a computer via a
USB hub may cause unstable operation.
_ When [MTP] is set for the submenu that
appears by pressing _._after selecting [PC]
in step 3, images cannot be transferred to a
computer using OLYMPUS Master 2.
.....Starting QLYMPUS Master 2
Double-click the OLYMPUS Master 2
icon.
Windows
app....... the desk top.
Macintosh
"_ appears in the OLYMPUS Master 2 folder.
• Browse window appears after starting the
software.
@} When you start OLYMPUS Master 2 for the
first time after installation, "Default Settings"
and "Registration" screen appear. Follow the
instructions on the screen.
iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii___!i_!i!____!__!_i!i!iii:!EN
To Next Page
Loading...
