2
SZ2-STU1/STU3
Fig. 4
40 mm or more
10 - 60 mm
1. Install the stand on a sturdy table ³ having thickness of 10 to 60 mm
and edge space length of 40 mm or more. (Fig. 4)
2. The load capacity is 4.6 kg regardless of the orientation.
3. Before installing or uninstalling the stand on or from the table, remove the
column from the table clamp to secure safety.
If you do not remove the column, always have another person hold the
horizontal arm section.
4. If internal oscillations are troublesome, insert the provided rubber sheet
| below the stand. (Fig. 4)
³
|
SZ2-STU3
To Next Page
Loading...
