Olympus SZX2 Series - Summary of Operation Procedure; Preparation; Observation Procedure

SZX2-ILLC16/ILLC10
8
SUMMARY OF OPERATION PROCEDURE
Preparation
Ref. Page
1. Check that the required modules are mounted. ................................................................................................................................................................................................... (P. 6 & 7)
2. Adjust the orientation of the microscope body and the rotation tension of the coarse focus adjustment knob.*
3. Turn on the main switch of the light source unit and adjust the brightness.*
4. Adjust the orientation of the quarter-wave plate. .............................................................................................................................................................................................................. (P. 9)
Observation Procedure
1. Place a specimen on the stage.
2. Adjust the brightness to an easy-to-observe level.*
3. Turn the quarter-wave plate rotation annulus to select an optimum rotation position................................................................................................ (P. 10)
4. Observe the specimen with the standard observation procedure.*
* Refer to the instruction manuals of the SZX16/SZX10/SZX7 microscope and the LG-PS2 light source unit.