5
BXFMA
NOMENCLATURE
Motorized Illuminator with Motorized Focusing Unit
BXFMA-F
}The observation method (BF/DF) switching, aperture iris diaphragm opening/closing and focus adjustment (which can also
be controlled using the U-FH focus adjustment knob unit) can be controlled using the BX2-BSW software run on the PC.
Surface for installation on system
(Left side panel)
Filter slider (Page 13)
AF support bracket clamping screws
(x 4)
Aperture iris diaphragm lock screw (Page 11)
Auxiliary ring
(Note 1)
Aperture iris diaphragm
centering screws (Page 11)
Field iris diaphragm centering screws (Page 10)
Field iris diaphragm lever (Page 11)
Surface for installation on system
(Bottom panel)
Allen wrench (1.5 mm)
Allen screwdriver (3 mm)
Seals (x 6)
AF support brackets
(Page 28)
Field iris diaphragm auxiliary lever
(Detachable)
Connection cable
(50-pin)
(36-pin)
(Note 1) The auxiliary ring is for use with the high-
intensity lamp housing. When the halogen
lamp housing is used, remove the ring by
loosening the 2 clamping screws using the
Allen screwdriver.
To Next Page
Loading...
Need help?
General
