Olympus VS120 - Page 26

Acquiring Images / VS120-S1
22
Page
6 Selecting the Objective Lens (Quick) (Expert) (Virtual-Z)
Click the Objective Lens button that you want to
use.
(The check mark appears on the selected
objective lens button.)
Confirm the scan area using the [Stage Navigator]
shown on the lower right of the screen.
The area inside the yellow frame is the scan area
detected by the software.
To capture the image in Z mode, click (Scan one
Z plane) button and then click [Virtual Z].
For more information, refer to the online help.
Click .
The [More Options] window appears.
Select [Acquisition] on the left side of the Option
window.
Uncheck [Auto exposure before scan] in the
Options window.
Click .
Click on the tool bar.
A live image is displayed.
Use in the [Stage Navigator] on the lower
rightof the screen to enlarge the image.