0')
c
......
......
Q.)
(9
42
EN
Using a new card
• Ifyou use a non-Olympus card or a card used for another application, such as a computer,
use the [FORMAT] function to format the card.
IJW
"MEMORY FORMAT (FORMAT) Formatting the internal memory or card"
(P.
26)
card access lamp is blinking
•
An
image or movie is being recorded or downloaded (when connected to a computer).
•
Do
not do any
of
the following while the card access lamp is blinking. Doing so may
prevent the image data from being saved and render the internal memory or card
unusable.
• Open the battery/card compartment cover
• Remove the battery and card
Extending the useful life of the battery
• Performing any
of
the following operations when not actually taking pictures can deplete
the battery power.
• Repeatedly pressing the shutter button halfway
• Repeatedly using the zoom
• To save battery power, set [POWER SAVE] to [ON], or turn off the camera whenever it
is
not
in
use.
IJW
"POWER SAVE Setting the camera to the power save mode"
(P.
28)
Functions that cannot be selected from menus/Functions that cannot be
selected even by pressing the function buttons
• Some items may not be selectable from the menus when using the arrow pad.
(The menu items displayed
in
gray cannot
be
selected.)
• Items that cannot be set with the current shooting mode
• Items that cannot be set because
of
an item that has already been set:
[s!.]
and
[~],
etc.
• Some functions cannot be used when there is no card
in
the camera.
[PANORAMA], [PRINT ORDER], [FORMAT], [BACKUP]
• When the mode dial is set to
GUIDE,
functions cannot be changed.
To return the settings of functions to default settings
• To return the changed shooting settings to default settings while shooting, set [RESET] to
[YES].
IJW
"RESET Changing the shooting functions back to default settings"
(P.
21)
• All shooting settings except for P mode, [IMAGE QUALITY] and the selected scene mode
return to default settings when the camera is turned off.
Playback help and troubleshooting tips
Bright specks appear
in
the picture
• Light reflecting from dust and other particles
in
the air at night may appear as bright specks
in
pictures taken using the flash.
To Next Page
Loading...
