Omega CTXL-TRH-W-W9 - 2.6 Setting Alarms and Time Clock

2.6 Setting Alarms and Time Clock
The following flow chart shows how to set the alarms and the time clock in a
Temperature/Humidity model recorder.
Setting Up the Recorder
2
2-10
RH
°F
%
7D
1
°F
7D
1
°F
7D
Press or keys to set high alarm
Press key to enable/disable alarm
7D
RH%
2
High Alarm - Channel 1 (Temperature)
Real Time Mode
Low Alarm - Channel 1 (Temperature)
Press or keys to set low alarm
Press key to enable/disable alarm
High Alarm - Channel 2 (Humidity)
Press or keys to set high alarm
Press key to enable/disable alarm
2
RH%
7D
Press key to enable/disable alarm
Low Alarm - Channel 2 (Humidity)
Press or keys to set low alarm
7D
7D
HAL
icon is on when high alarm enabled
icon is on when low alarm enabled
LAL
HAL
LAL
icon is on when low alarm enabled
(Military time 0-23)
Clock - Display Hour
Press or keys to set the hour
icon is on when high alarm enabled
CONFIG
CONFIG
CONFIG
CONFIG
CONFIG
CONFIG
(00-59)
Clock - Display Minute
Press or keys to set the minute
MODE
MODE
MODE
MODE
MODE
MODE
7D
CONFIG
(1-12)
Clock - Display Month
Press or keys to set the month
MODE
7D
CONFIG
CONFIG
(01-31)
Clock - Display Day
Press or keys to set the day
HAL
LAL
HAL
LAL
SET
SET
SET
SET
NO
NO
YES
YES
NO
YES
NO
YES
NO
YES
NO
YES
NO
YES
NO
YES
Figure 2-13. Setting Alarms and Time Clock