PC Interface Software
3
3-10
Figure 3-4. Settings Menu - Re-scale/Calibrate/Memory Tab Screen
In the settings menu Re-scale/Calibrate/Memory Tab
• You can re-scale the chart paper of the recorder within its range, both
temperature & humidity.
• You can re-scale the chart paper to the factory default values by clicking the
“Defaults” button.
• You can re-calibrate the humidity channel. The calibration procedure is the
same as what is described in section 3.4 of the manual, except you select the
calibration values (33 & 75% RH), and click the Calibrate button.
• You can download the recorded data from the chart recorder.
• You can erase the recorded data from the chart recorder.
To Next Page
Loading...
