In the Strip Chart tab of the Settings menu you can do the following:
• You can select the Screen Chart Speed from 1 hour up to 32 days.
• You can select the Pen colors for the two channels.
• You can set the upper & lower values of the Y axis, auto or logarithmic scale.
Figure 3-11. Settings Menu (Strip Chart Tab) Screen
In the settings menu (Re-scale/Calibrate/Memory Tab)
• You can re-scale the chart paper of the recorder within its range, or go back to
the default setting.
• You can download the recorded data from the chart recorder and save it to a
file.
• You can erase the recorded data from the chart recorder.
• You can change the thermocouple input type from K to J or T.
PC Interface Software
3
3-19
To Next Page
Loading...
