Omicron Lab CT Analyzer - Page 208

CT SB2 User Manual
14
Figure 2-2 Side view to the CT SB2 with mains connection unit, PC and
CTA interfaces, and equipotential bonding connector
Mains socket (IEC320)ON/OFF switch
Equipotential bonding connector
(4mm socket combined with knurled
nut for clamp connection)
Mains fuse: 2 x T2.0A / 250V,
high breaking capacity
PC interface
9-pole SUB-D connector, female.
Connection of the CT SB2 to a PC
(to serial COM interface or USB
interface via USB-serial adapter).
CTA interface
9-pole SUB-D connector, male.
Connection of the CT SB2 to the remote
control interface of the CT Analyzer.