14
7. Configuring the CMA 56 as external amplifier for the CMC test device:
When the CMC test device is started up, the internal current amplifiers
are always considered to be the active current amplifiers. To control the
CMA 56 as amplifier, the device must be specified as the active
amplifier in the CONFIGURATION menu.
a) Select menu item Configuration in the main menu and enter the
CONFIGURATION menu.
b) Select menu item I-amplifier to enter the selection list of the
available current amplifiers and select
CMA 56 xxxxxx.
c) Return to the main menu via menu item Quit.
The following message will now appear:
Ext. amplifier: I: CMA 56 xxxxxx.
Now the CMA 56 is configured as an external amplifier for the CMC test
device.
To Next Page
Loading...
General