Connections and Interfaces
33
Ordering Information for "Ampl. in" and "Ampl. out"
Manufacturer Designation of Plug for "Ampl. Out" and "Ampl. In"
For "Ampl. out":
Plug with 2 guide cams and pull relief
For "Ampl in":
Plug with 1 guide cam and pull relief
Bend protection spout black
Table 4 Manufacturer designation
Manufacturer / Supplier of plug for "Ampl. Out" and "Ampl. In"
LEMO USA Inc. 335 Tesconi Circle, Santa Rosa, CA 95406,
Tel.: 001/707/578 88 11, Fax: 001/707/578 08 69
LEMOSA GmbH , Stahlgruberring 7, 8000 München 82
Tel. (089) 42 30 85
FAX (089) 42 71 92
Table 5 Manufacturers / Suppliers
If you want to order from OMICRON, see section Error! Reference source
not found. Ordering Information.
To Next Page
Loading...
General