GPS Synchronization Unit CMGPS
6
Safety Requirements
Before operating the CMGPS, carefully read the following safety
instructions.
Only operate the CMGPS after you have read this manual and fully
understood the instructions herein.
The CMGPS may only be operated by trained personnel. Any
maloperation can result in damage to property or persons.
Principles, Designated Use
•The CMGPS should only be used when in a technically sound condition. Its
use should be in accordance with the safety regulations for the specific job
site and application. Always be aware of the dangers of the high voltages and
currents associated with this equipment. Pay attention to the information
provided in the reference manual and the software documentation.
•The CMGPS is exclusively intended for the application areas specified in
section 1, "Designated Use" on page 9. The manufacturer/distributors are not
liable for damage resulting from unintended usage. The user alone assumes
all responsibility and risk.
• The instructions provided in this reference manual and the associated
software manuals are considered part of the rules governing proper usage.
• Do not open the CMGPS or remove any of its housing components.
Orderly Practices and Procedures
• The reference manual (or its "electronic PDF pendant", which is installed to
your computer with the OMICRON Test Universe software) should always
be available on site where the CMGPS is used.
Note: The OMICRON Test Universe software also installs a PDF version of
this reference manual. It can directly be opened by a mouse-click from the
help topic "User Manuals". The Test Universe Help can be launched by
clicking Help on the Start Page.
• Personnel assigned to using the CMGPS must have read this reference
manual and fully understood the instructions herein.
• Do not carry out any modifications, extensions or adaptations at the
CMGPS.
To Next Page
Loading...