Omni Bead Ruptor 24 - Page 14

14
SECTION 3 — BEAD RUPTOR SAMPLE TUBES
3.2 ORDERING INFORMATION (cont.)
TUBE SIZE BEAD SIZE
DESCRIPTION
QUANTITY ORDER NUMBER
7 mL 2.38 mm Hard Tissue Grinding Mix 50 19-670
7 mL 1.4 mm
Soft Tissue Homogenizing
Bead Mix
50 19-677
7 mL 2.8 mm
Hard Tissue Homogenizing
Bead Mix
50 19-678
BEAD MEDIA
Metal
Ceramic
7 mL PREFILLED BEAD MILL TUBES
BEAD MEDIA
Glass
Ceramic
Metal
None
TUBE
SIZE
BEAD SIZE
BEAD
QUANTITY
DESCRIPTION QUANTITY
ORDER
NUMBER
7 mL 0.1 mm 400 g
Empty Sample Tubes with
Bulk Micro-Organism Lysing Bead Mix
50 19-654
7 mL 0.5 mm 400 g
Empty Sample Tubes with Bulk Tough
Micro-Organism Lysing Bead Mix
50 19-656
7 mL 1.4 mm 325 g
Empty Sample Tubes with Bulk
Soft Tissue Homogenizing Bead Mix
50 19-652
7 mL 2.8 mm 325 g
Empty Sample Tubes with Bulk
Hard Tissue Homogenizing Bead Mix
50 19-653
7 mL 2.38 mm 500 g
Empty Sample Tubes with Bulk
Hard Tissue Grinding Bead Mix
50 19-655
7 mL -
Empty Sample Tubes
1,000 19-651
7 mL Bead Tubes are not certied RNase/DNase Free
7 mL BEAD MILL TUBES AND BULK BEAD MEDIA (These tubes are not pre-lled with beads)
Pre-lled Tubes maximum recommended speed is 6.0 m/s
Pre-lled Tubes maximum recommended speed is 7 m/s.15ml bead tubes are not certied RNase/DNase free.
BULK 15 mL SCREW CAP SAMPLE TUBES NO BEADS
SECTION 3 — BEAD RUPTOR SAMPLE TUBES
TUBE SIZE
DESCRIPTION
QUANTITY ORDER NUMBER
15 mL Polypropylene conical screw cap tube with caps 100 19-6615
15ml Polypropylene conical screw cap tube with caps 500 19-6615-500