Omni Bead Ruptor 24 - Page 15

15
30 mL Bead Tubes are not certied RNase/DNase Free, Maximum recommended speed is 5.0 m/s for 30ml tubes
SECTION 3 — BEAD RUPTOR SAMPLE TUBES
3.2 ORDERING INFORMATION (cont.)
TUBE SIZE BEAD SIZE
DESCRIPTION
QUANTITY ORDER NUMBER
30 mL 2.38 mm Hard Tissue Grinding Mix 50 19-6350
30 mL 2.38 mm
Hard Tissue Impaction Grinding
Mix with 1/4” Ceramic
50 19-6350Z
30 mL 1.4 mm
Soft Tissue Homogenizing
Bead Mix
50 19-6357
30 mL 1.4 mm
Soft Tissue Impaction Homogenizing
Mix with 1/4” Ceramic
50 19-6357Z
30 mL 2.8 mm Hard Tissue Homogenizing Mix 50 19-6358
30 mL 2.8 mm
Hard Tissue Impaction Homogenizing
Mix with 1/4” Ceramic
50 19-6358Z
BEAD MEDIA
Metal
Ceramic
Bulk 30 mL Screw Cap Sample Tubes (No Beads)
Empty sample tubes with caps. Beads are not included.
TUBE SIZE DESCRIPTION QUANTITY ORDER NUMBER
30 mL
Polypropylene screw cap tube with caps.
100 19-6635
30 mL
Non-reinforced Polypropylene screw cap
tube with caps.
500 19-6635-500
BEAD MEDIA
Metal
Ceramic
TUBE
SIZE
BEAD SIZE
BEAD
QUANTITY
DESCRIPTION QUANTITY
ORDER
NUMBER
30 mL 2.38 mm 500 g
Empty Sample Tubes with Bulk
Hard Tissue Grinding Mix
50 19-6350K
30 mL 1.4 mm 325 g
Empty Sample Tubes with Bulk
Soft Tissue Homogenizing Mix
50 19-6357K
30 mL 2.8 mm 325 g
Empty Sample Tubes with Bulk
Hard Tissue Homogenizing Mix
50 19-6358K
30 mL BEAD MILL TUBES AND BULK BEAD MEDIA (These tubes are not pre-lled with beads)
30 mL PREFILLED BEAD MILL TUBES