Omnilux MINI - General Safety

10 11
USER GUIDE
• NEVER use the Blemish Eraser device near water or where
water can be spilt onto the equipment. DO NOT use the
Blemish Eraser device if you think it has come into contact
with water.
• Keep the Blemish Eraser device away from HOT surfaces
or direct sunlight.
• DO NOT attempt to modify the Blemish Eraser device
in any way. Modifying the Blemish Eraser device will void
your warranty. Modifying the Blemish Eraser device could
cause an electric shock when the system is used again.
The system contains no serviceable parts.
• DO NOT use the Blemish Eraser device if the device,
packaging, or cable are damaged in any way.
• DO NOT use the Blemish Eraser device any longer if it
shows any signs of damage to the material through wear
and tear.
• DO NOT leave the Blemish Eraser device unattended
when it is switched on. Accidental mishandling of the
device could lead to the risk of re or burns.
General Safety
The Blemish Eraser device is an electrical device, which
under certain circumstances could present an electrical
shock hazard to the user. Please read this User Guide
thoroughly and follow directions stated in the manual to
assure maximum safety during operation.
The Blemish Eraser device may only be charged with the
charging cable that is supplied with the device. Use of other
charging cables may not be safe and could lead to electric
shock.