22 23
OMNILUX™ MINI BLEMISH ERASER
Care and Maintenance
• The lifetime of the Lithium battery can be maximized
by allowing it to fully charge and then fully discharge
during regular use.
• Store the Blemish Eraser device at room temperature
in dry conditions.
• Avoid storing the Blemish Eraser device in dusty
conditions, in direct sunlight or in damp and humid
conditions.
• The Blemish Eraser device contains no serviceable
parts.
• Before each use, with the device switched off, clean
the Blemish Eraser device following the cleaning
instructions below.
• DO NOT use the Blemish Eraser device any longer if
it shows any signs of damage to the material through
wear and tear.
• DO NOT use the hydrocolloid after its expiry date.
• DO NOT use the Blemish Eraser device if it has been
exposed to environmental conditions outside of
those specied in the Technical Specication.
Cleaning the Blemish Eraser Device
• Before cleaning ensure that the charging cable is
disconnected from the Blemish Eraser device and that it
is not charging
• Clean the Blemish Eraser device with a water-based wipe.
Stubborn stains or adhesive residue can be removed by
wiping gently with 70% alcohol.
To Next Page
Loading...
