LVS-750
0 External System Operations Manual
LVS-7500 External System Operations Manual Page 4 of 129
Safety Instructions
This unit has been carefully designed to provide years of safe, reliable performance. However, as with all
electrical equipment, there are some basic precautions that you should follow to avoid personal injury or damage
to the system:
• Before using the system, carefully read all the installation and operating instructions.
• Observe all warning instruc
tion labels on the system.
• To protect your system from overheating, make sure no openings on the system are blocked.
• Never insert anything into the openings of the system.
• Do not use the system near water or spill liquid into it.
• All components used to create your system are UL and CE approved. All circuits were designed to
incorporate maximum safety. However, any equipment using electrical voltages may cause personal injury
if improperly handled.
• Do not attempt to work on the system with the main power lines connected.
• Ensure that the AC power source matches the ratings listed for the system. If unsure, check with your
dealer or loc
al utility provider.
• Do not place the AC power cord where it can be s
tepped on. If the AC power cord becomes damaged or
frayed, replace it immediately.
• Avoid looking directly into any system lights. If you need to examine the lights, or look at any component
near the lights, be sure to first turn off the lights. If the lights cannot be turned off, then wear polarized
sunglasses while examining the lights.
• To avoid damaging the system, turn off and unplug the system before cleaning.
• If the system ever needs repair, consult Omron Microscan or your Omron Microscan Distributor.
Important Information
• Due to continual product improvements
, the product you receive may differ from the content outlined in
this guide. If you have questions about your product that are not covered in this guide, please contact your
Omron Microscan representative or Omron Microscan headquarters at +1-800-762-1149 or
helpdesk@microscan.com.
• The LVS-7500 External System arrives to your site packaged in specially designed shipping cartons. Do
not discard the s
hipping cartons in case you must ship or store the system for any reason. Failure to use
these cartons when returning y
our product to Omron Microscan will void warranty.
To Next Page
Loading...