LVS-7500 External System Operations Manual
LVS-7500 External System Operations Manual Page 99 of 129
Troubleshooting
Problem Description Possible Causes
System will not acquire images
• The roll of labels is not moving.
• Encoder is not in contact with moving roll of labels.
• Encoder cable is not plugged in or is damaged.
• The Readhead has lost power.
• The Readhead to LVS-7500 interface cables are not
plugged in or are damaged.
System is acquiring every other label The label repeat is set too large.
Image has uneven lighting
• An LED may have burned out in the sensor.
• The sensor may have a label stuck to it
For Error Condition issues, refer to the “Step 6: Alarm Matrix” section and review the following topics:
• Error Code Definitions
• Common Causes for Error Conditions
To Next Page
Loading...