1716
1. Remove the screws on the battery cover
located on the back of the unit.
Use a small screwdriver to remove the
screws on the battery cover.
2. Remove the battery cover.
BATTERY INSTALLATION
Low Battery Indicator
When the Low Battery Indicator appears on the display, immediately
replace the battery with a new CR2032 battery.
When the battery is removed from the unit the settings and all data
stored in the memory will be erased. Be sure to write important data
stored in the memory in a notebook.
USING THE SYSTEM RESET FUNCTION
Use the SYSTEM RESET function in the following cases:
• When the display becomes unrecognizable
• When you want to delete all data
Press the SYSTEM RESET Button on the
back of the unit.
All the data in memory is deleted and settings
return to default values.
To reset the time, height and weight refer to
“Setting the Time” on page 8.
The battery is installed in the pedometer when this unit is purchased.
HJ-151-IM_Q4.qxd 07.1.25 11:09 AM Page 16
To Next Page
Loading...
Need help?
General
