30
6.3 Restoring Your Monitor to the Default Settings
To delete all the information stored in your monitor, follow the instructions below.
Make sure that your monitor is turned off.
1. While holding the button down,
press the [START/STOP] button within
2 seconds. Hold both buttons for more
than 5 seconds.
• Reverting to its default setting of your
monitor does not delete the information in
the app.
• Your monitor will automatically turn off after
3 seconds.
• You will need to re-pair your monitor when using the monitor again. Without
re-pairing, your readings will not be transferred to your app.
To Next Page
Loading...
