Why does the heart symbol ' ' appear on my Omron BP7350CAN?
The heart symbol appears because the pulse rate is not being detected correctly. Make sure to apply the arm cuff correctly and remain still and sit correctly during measurement. If the symbol continues to appear, it is recommended you consult with your physician.
What does it mean when the Bluetooth symbol flashes on my Omron Blood Pressure Monitor?
When the Bluetooth symbol flashes, the monitor is waiting to pair with your smart device. Refer to the instructions for pairing your monitor with your smart device, or press the [START/STOP] button to cancel pairing and turn your monitor off.
Why is the Bluetooth symbol flashing on my Omron BP7350CAN Blood Pressure Monitor?
The Bluetooth symbol flashes because the monitor is ready to transfer your readings to the smart device. Open the “OMRON connect US/CAN” app to transfer your readings.
Why does the Bluetooth symbol flash on my Omron BP7350CAN Blood Pressure Monitor, and what does it mean?
The Bluetooth symbol flashes because there are more than 48 readings in memory to be transferred. Pair or transfer your readings to the “OMRON connect US/CAN” app, so you can keep them in memory in the app, and this error symbol disappears.
What to do if any other problem occurs with my Omron Blood Pressure Monitor?
Press the [START/STOP] button to turn the monitor off, then press it again to take a measurement. If the problem continues, remove all batteries and wait for 30 seconds before reinstalling them. If the problem persists, contact customer service.
Covers essential safety guidelines, intended use, and contraindications for the monitor.
Instructions for receiving inspection and where to find symbol explanations.
Highlights critical warnings, potential hazards, and general safety instructions.
Details about radio frequency emissions and usage restrictions for data transmission.
Guidelines for safe handling and usage of the AC adapter and batteries.
Describes potential hazards leading to minor injury or equipment damage during use.
Tips for accurate readings, including rest, environment, and avoiding talking.
Warning about not interrupting data transfer by removing batteries or AC adapter.
Specific instructions on handling AC adapter cables and storage.
Detailed instructions on battery insertion, type, and handling fluid.
Lists package contents and identifies key monitor and arm cuff components.
Identifies connection ports and battery compartment on the monitor's rear and sides.
Details the parts of the arm cuff, including air plug and tube.
Explains common display symbols like Average, Memory, Systolic BP, and Heartbeat.
Explains other display symbols like Bluetooth, Battery, High BP, and Movement Error.
Detailed explanation of various display symbols and their meanings, including Bluetooth status.
Further explanation of symbols for Sync, Battery, High BP, OK, Movement Error.
Explains the symbol for irregular heartbeat detection and its interpretation.
Indicates how pulse rate is displayed after measurement.
Provides detailed definition and visual representation of irregular heartbeat detection.
Clarifies the display of pulse rate after measurement.
Presents the ACC/AHA guidelines for classifying blood pressure categories in adults.
Reiterates the warning against self-diagnosis and emphasizes consulting a physician.
Step-by-step guide on how to insert batteries into the monitor correctly.
Instructions for manually setting the date and time on the monitor.
Continues the process of setting date and time, including confirmation and storage.
Tips for accurate readings, including stress, environment, and timing.
Safety cautions regarding activities before taking a measurement like eating or drinking.
Instructions for plugging the arm cuff into the monitor's air jack.
Advises removing tight clothing from the arm during measurement for comfort.
Detailed steps for positioning the arm cuff on the left upper arm.
Specific instructions for applying the arm cuff to the right arm.
Guidelines for maintaining a relaxed and correct posture during measurement.
Instructions on how to select a user ID for storing readings.
Step-by-step guide to taking a blood pressure measurement without a smart device.
Details the steps from pressing start to displaying results, including symbols.
How to turn off the monitor and recommended wait times between measurements.
Instructions for using the monitor in guest mode without storing readings.
Procedure for taking measurements when systolic pressure exceeds 210 mmHg.
Warning about potential bruising from inflating the cuff too high.
Steps for connecting the monitor to a smart device via Bluetooth.
Guidance on downloading and installing the OMRON connect app.
How to verify the monitor is successfully connected to the smart device.
Instructions for taking measurements when using the smart device app.
How to enable or disable the Bluetooth function on the monitor.
Safety warning regarding RF usage in restricted areas like aircraft or hospitals.
Steps to access and view past blood pressure readings stored in the monitor.
How to scroll through stored readings using the buttons.
Instructions on how to view the average of recent readings.
Procedure to clear all stored blood pressure readings from the monitor.
How to reset the monitor to its original factory default settings.
Explains possible causes and solutions for E1 (no inflation) and E2 (measurement failure).
Details causes and solutions for errors related to cuff pressure, movement, and pulse detection.
Explains error codes related to Bluetooth connection, data transfer, and date/time.
Covers problems related to depleted batteries, no display, and incorrect readings.
Addresses issues with smart device communication and other general problems.
General maintenance advice and warning about modifications voiding the warranty.
Guidelines for properly storing the monitor and arm cuff.
Instructions on how to clean the monitor and arm cuff safely.
Advice on disposing of the monitor and accessories according to local regulations.
Lists optional accessories like Easy Wrap ComFit Cuff and AC Adapter.
Instructions on how to connect and use the optional AC adapter.
Technical details of the monitor, including model, ranges, accuracy, and power.
Details on weight, dimensions, cuff circumference, memory, and contents.
Information on protection against electric shock and applied parts.
Explains potential interference from other wireless devices operating on similar frequencies.
Explains pictograms used on the product, like artery positioning and cuff compatibility.
Details FCC rules, compliance conditions, and measures to correct interference.
States compliance with FCC/ISED radiation exposure limits and RF energy levels.
Outlines the warranty period for the monitor and arm cuff and how to obtain service.
Details OMRON's warranty disclaimers and limitations on liability.
Provides website and toll-free number for customer service inquiries.
General| Device Type | Upper Arm Blood Pressure Monitor |
|---|---|
| Measurement Method | Oscillometric |
| Irregular Heartbeat Detection | Yes |
| Connectivity | Bluetooth |
| Power Source | 4 AA batteries or AC adapter |
| Average Reading | Yes |
| AC Adapter | Optional |
| Technology | IntelliSense |
| Cuff Size | 22-42 cm |
| Memory | 60 readings |
| Display | LCD |
| Warranty | 5-year warranty |
To Next Page
