Omron BP9300T - Taking Measurements Without Telehealth Receiver; Step-by-Step Measurement Guide

20
3. Using Your Monitor without a Telehealth Service Receiver
3.1 Taking a Measurement
You can use your monitor without pairing to a Telehealth service receiver. To pair
your monitor with a receiver, refer to sub-section 4.1.
Note
• To stop the measurement, press the [START/STOP] button once to deflate the
arm cuff.
• This device tracks readings for one user. If you are sharing with another, please
manually track your readings separately.
Caution
• DO NOT use this monitor with other medical electrical (ME) equipment
simultaneously. This may result in incorrect operation of the devices and/or
cause an inaccurate reading.
• Remain still and DO NOT talk while taking a measurement.
1. Press the [START/STOP] button.
All symbols appear on the display before starting the measurement.
2. Remain still and do not talk until the entire measurement process
is complete.
The “ ” symbol flashes at every heartbeat.
After your monitor has detected your blood pressure and pulse rate, the cuff
automatically deflates. Your blood pressure and pulse rate are displayed.
If either the systolic or the diastolic reading is high (refer to sub-section 1.3),
the “ ” symbol appears.