25
5. Using Memory Function
Your monitor automatically stores up to 30 readings.
5.1 Viewing the Readings Stored in Memory
1. Press the button.
The Memory number appears for 1.5 seconds before the pulse rate is
displayed. The most recent reading stored in the memory will be numbered
as “1”.
• If the reading is high (refer to sub-section 1.3), the “ ”
symbol appears.
• If there are no readings stored in the memory, the screen to
the right is displayed.
• If the memory is full, new readings will replace the old
readings, starting with the oldest reading.
2. Press the button repeatedly to scroll through the previous readings stored
in the memory.
To Next Page
Loading...
