7 Tag Data Link Functions
7-60
CJ-series EtherNet/IP Units Operation Manual for NJ-series CPU Unit (W495)
Using the Network Configurator
You can start and stop tag data links for individual devices using the Connection Tab Page in the
Monitor Device Dialog Box. This applies only to tag data links for which the device is the originator.
Select Monitor from the Device Menu to access the Monitor Device Dialog Box.
Start Connection Button:
Starts all connections for which the device is the originator.
Stop Connection Button:
Stops all connections for which the device is the originator.
Starting and Stopping Tag Data Links for Individual Devices
To Next Page
Loading...
