Omron CJ1W-EIP21 - Saving the Network Configuration File

7 Tag Data Link Functions
7-62
CJ-series EtherNet/IP Units Operation Manual for NJ-series CPU Unit (W495)
Yes Button:
The following dialog box is displayed.
Select the Initialize tag data link configuration, and then emulate cycling power Option and then click
the OK Button.
Precautions for Correct UsePrecautions for Correct Use
The Controller is not restarted. Only the EtherNet/IP Unit is restarted.
No Button:
The device parameters are not cleared or reset.
You can save device parameters set in the Network Configurator or device parameters uploaded from
the network in a network configuration file.
1 Select File − Save As.
The following dialog box is displayed.
Untitled.nvf is displayed as the default file name.
7-2-14 Saving the Network Configuration File