11 SNMP Agent
11-16
CJ-series EtherNet/IP Units Operation Manual for NJ-series CPU Unit (W495)
tcpConnTable (13) NA
The information table specific to the TCP connec-
tion.
--- According to the
standard.
tcpConnEntry (1) NA
Entry information related to a specific TCP con-
nection. This value is deleted if the connection
changes to the CLOSE state. The indices are tcp-
ConnLocalAddress, tcpConnLocalPort, tcpCon-
nRemAddress, and tcpConnRemPort.
--- According to the
standard.
tcpConnState (1) RW
The status of the TCP connection.
closed(1)
listen(2)
synSent(3)
synReceived(4)
established(5)
finWait1(6)
finWait2(7)
closeWait(8)
lastAck(9)
closing(10)
timeWait(11)
Sup-
ported.
According to the
standard.
tcpConnLocal-
Address
(2) RO
The local IP address of this TCP connection. A
value of 0.0.0.0 is used for connections in the LIS-
TEN state that accept connections from any IP
interface related to the node.
Sup-
ported.
According to the
standard.
tcpConnLo-
calPort
(3) RO
The local port number for this TCP connection.
Sup-
ported.
According to the
standard.
tcpConnRe-
mAddress
(4) RO
The remote IP address for this TCP connection.
Sup-
ported.
According to the
standard.
tcpConnRem-
Port
(5) RO
The remote port number for this TCP connection.
Sup-
ported.
According to the
standard.
tcpInErrs (14) RO
The total number of error segments received
(TCP checksum errors, etc.).
Sup-
ported.
According to the
standard.
tcpOutRsts (15) RO
The number of segments sent with the RST flag
(the number of times the TCP connection was
reset).
Sup-
ported.
According to the
standard.
Name Standard [(identifier) attribute]
Sup-
port
Implementation
specifications
To Next Page
Loading...
