PRECAUTIONS
5
PRECAUTIONS
This section provides general precautions for using the USB-Serial Conversion Cable
and related devices.
The information contained in this section is important for the safe and reliable
application of the USB-Serial Conversion Cable. You must read this section and
understand the information contained before attempting to set up or operate a
USB-Serial Conversion Cable and PLC system.
█ Intended Audience
This manual is intended for the following personnel, who must also have knowledge of
electrical systems (an electrical engineer or the equivalent).
•Personnel in charge of purchasing FA devices.
•Personnel in charge of designing FA systems.
•Personnel in charge of managing FA systems and facilities.
█ General Precautions
•The user must operate the product according to the performance specifications
described in the operation manuals.
•Consult your OMRON representative before using the product under conditions which
are not described in the manual or applying the product to nuclear control systems,
railroad systems, aviation systems, vehicles, combustion systems, medical equipment,
amusement machines, safety equipment, and other systems, machines, and
equipment that may have a serious influence on lives and property if used improperly.
•This manual provides important information for using the CS1W-CIF31 USB-Serial
Conversion Cable. Be sure to read this manual before attempting to use the
Conversion Cable and keep this manual close at hand for reference during operation.
WARNING
It is extremely important that a PLC and all PLC Units be used for the specified purpose
and under the specified conditions, especially in applications that can directly or
indirectly affect human life. You must consult with your OMRON representative before
applying a PLC system to the above mentioned applications.
█ Operating Environment Precautions
Do not use the USB-serial Conversion Cable in the following places:
•Locations subject to strong electromagnetic fields.
•Locations subject to direct sunlight.
•Locations subject to temperatures or humidity outside the range specified in the
specifications.
•Locations subject to condensation as the result of severe changes in temperature.
•Locations subject to corrosive or flammable gases.
•Locations subject to excessive dust, or salts, or metal filings.
•Locations subject to exposure to water, oil, or chemicals.
•Locations subject to shock or vibration.
Provide proper shielding when installing in the following locations:
•Locations subject to static electricity or other sources of noise.
•Locations subject to strong electromagnetic fields.
•Locations subject to possible exposure to radiation.
•Locations near power supply lines.
To Next Page
Loading...
Need help?
General
