Omron CX-PROGRAMMER - INTRODUCTION GUIDE - 5-3. Editing Symbol Comments

5-3. Edit of Symbol Comment
Click
Ladder Window is
switched to the Symbol
Comment Editing
window.
Double-click the left
mouse button on a bit
number that you want to
enter a symbol comment,
and you will able to enter
a symbol comment.
Example of copying & pasting comments of two bits
Drag the mouse with the
right mouse button
pressed to invert the
source bits of copy in
blue.
Click the right
mouse button on
the range, and
select [Copy] from
the popup menu.
Click the right mouse button
on the bit number of the copy
destination, and select [Paste].
The comments of the selected
two bits are copied.
Copy&Paste of symbol
comments is possible between
Excel and CX-Programmer too.
Copy&Paste of symbol
comments is possible between
Excel and CX-Programmer too.
Installation
to Startup
Installation
to Startup
Opening a
new project
Opening a
new project
Device type
settings
Device type
settings
Creating a
program
Creating a
program
Copy&Paste and deletion of one or more comments are possible by the cell.
Copy&Paste and deletion of one or more comments are possible by the cell.