Omron CX-PROGRAMMER - INTRODUCTION GUIDE - 4. Monitoring Multiple Locations; 5. Hexadecimal Monitoring

4. Monitoring - 2 Monitoring Many Locations in Program at Once
You can split Ladder Window and monitor more than one location in a program at once.
Move the mouse
pointer to the arrow
position shown in the
right figure and drag
the cursor down with
the left mouse button
pressed.
Move the mouse
pointer to the arrow
position shown in the
right figure and drag
the cursor down with
the left mouse button
pressed.
The screen is divided
into two panes up
and down, and you
can display any
address in two panes
respectively by using
the scroll bars.
The screen is divided
into two panes up
and down, and you
can display any
address in two panes
respectively by using
the scroll bars.
5. Monitoring - 3 Monitoring in Hex
Click to switch the display format of the present value of IO memory between
decimal and hexadecimal.
Online
to Transfer
Online
to Transfer
Monitoring
Monitoring
Force On
Force Off
Force On
Force Off
Program
Check
Program
Check
Online
Edit
Online
Edit
Shown in decimal
Shown in hex