Available PC
Hardware Requirements
*2: Required memory (RAM) size depends on the size of your programs to be created. If the required memory (RAM) size is larger than
your PC’s memory (RAM) size, operation of CX-Programmer might be slowed down.
*1: The following restrictions apply when CX-Programmer is used with Windows Vista.
Help files with an HLP file name extension cannot be accessed. These help files can be accessed if the program distributed by
Microsoft for Windows Vista is installed. Refer to the Microsoft homepage listed below or contact Microsoft for details on installing the
file. The download page is automatically displayed if an HLP help file is opened while the user is connected to the Internet.
http://support.microsoft.com/kb/917607/en-us
Windows 2000 Service Pack 2 or later
/Windows XP
PC
IBM PC/AT Compatible
CPU
DOS/V (IBM AT compatible) computer with a
Pentium II 333 MHz processor or higher.
Pentium III 1GHz or higher is recommended.
Hard disk space 550MB or more free space
Display
800X600 SVGA or grater
CD-ROM /DVD-ROM drive
At least one drive
Communications Port
At least one USB Port or RS-232C Port
OS
Item
256MB or higher required.
512MB or higher is recommended.
Windows Vista *1
Memory *2
IBM PC/AT or compatible with a processor
recommended by Microsoft.
Processor recommended by Microsoft.
1 GB or higher is recommended.
512MB or higher required.
1GB or higher is recommended.
For details of PC in which CX-One can be installed, refer to “CX-One Setup Manual”, Section 2 ”Installation and Uninstallation”.
To Next Page
Loading...
