Omron CX-PROGRAMMER - INTRODUCTION GUIDE - 16. Find from Address Reference Tool

Online
to Transfer
Online
to Transfer
Monitoring
Monitoring
Force On
Force Off
Force On
Force Off
Program
Check
Program
Check
Online
Edit
Online
Edit
16. Find Function - 1 Find from Address Reference Tool
Alt 4
Display Address
Reference Tool.
Click
The found
bits are listed.
The found
bits are listed.
3
Enter a bit number that you
want to find in the [Address]
field.
Enter a bit number that you
want to find in the [Address]
field.
1
You can also move the
cursor to a bit that you
want to find.
You can also move the
cursor to a bit that you
want to find.
Click a bit that you
want to find, and the
focus will move to the
corresponding position
in the rung.
2
Reference