Omron E5ARER - Installation

3-4
Part Names and Functions Section 3-1
Parts, Installa-
tion, and Wiring
3-1-4 Installation
Panel Cutout Dimensions
Installation Procedure 1. If the front of the Controller
needs to be watertight, attach
the provided watertight pack-
ing.
If the front of the Controller
does not need to be watertight,
the watertight packing does
not need to be attached.
2. Insert the Controller into the
cutout in the panel.
3. Insert the accompanying fit-
tings into the grooves on the
top and bottom of the rear
case.
4. Gradually tighten the screws in
the top and bottom fittings, al-
ternating between each so that
they are balanced. Tighten un-
til the ratchet turns without en-
gaging.
92
+0.8
0
92
+0.8
0
120 or higher
92
+0.8
0
110 or higher
60 or higher
45
+0.6
0
E5AR E5ER
120 or higher
E5AR
E5ER
(3)
(4)
(1) Watertight packing
(Model Y92S-P4)
E
5A
R
(2)
(1) Watertight packing
(Model Y92S-P5)
(3)
(4)
E
5
E
R
(2)