Omron E5CK-T User Manual

E5CK-T E5CK-T
175
Installation
J INSTALLATION
Main Parts
Termi-
nals
Output Board
Housing
Front panel
Option Board
Input type
connector
Removing Internal Mechanism
While pressing the hooks on the left and right sides of the front
panel, carefully pull the internal mechanism from the housing.
(Refer to the drawing below.)
J SETTING UP THE OUTPUT BOARD
1. Two rectangular holes are provided on the power board (right
side of Controller). Fit the two protrusions of the output board
into these two holes.
2. With the output board fitted into the power board, fit the out-
put board into the connector on the control board (left side of
Controller).
1
2
J SETTING UP THE OPERATION BOARD
1
2

Omron E5CK-T Specifications

General

Brand	Omron
Model	E5CK-T
Category	Controller
Language	English