Omron E5CN - Page 52

Com Data
3.1 Variable Area (Setting Range) List
3-11
Note: The alarm function can also be used in Controllers without alarm output terminals. In this case,
confirm alarm occurrences via the status data.
C3 0026 Heater burnout hyster-
esis
H'00000001 to H'000001F4 (0.1 to 50.0) Advanced
function
setting
C3 0027 ST stable range H'00000001 to H'0000270F (0.1 to 999.9)
C3 0028 α H'00000000 to H'00000064 (0.00 to 1.00)
C3 0029 MV upper limit Standard: MV lower limit + 0.1 to H’0000041A (MV lower
limit + 0.1 to 105.0)
Heating and cooling: H'00000000 to H'0000041A (0.0 to
105.0)
C3 002A MV lower limit Standard: H’FFFFFFCE to MV upper limit − 0.1 (−5.0 to MV
upper limit − 0.1)
Heating and cooling: H'FFFFFBE6 to H'00000000 (−105.0
to 0.0)
C3 002B Input digital filter H'00000000 to H'0000270F (0.0 to 999.9)
C3 002C Additional PV display H'00000000 (0): OFF
H'00000001 (1): ON
C3 002D MV display H'00000000 (0): OFF (display of manipulated variable OFF)
H'00000001 (1): ON (display of manipulated variable ON)
C3 002E Automatic display
return time
H'00000000 (0): OFF
H'00000001 to H'00000063 (1 to 99)
C3 002F Alarm 1 latch H'00000000 (0): OFF
H'00000001 (1): ON
C3 0030 Alarm 2 latch H'00000000 (0): OFF
H'00000001 (1): ON
C3 0031 Alarm 3 latch
(See note 2.)
H'00000000 (0): OFF
H'00000001 (1): ON
Varia
ble
type
Ad-
dress
Parameter name Setting (monitor) value Level