Omron E5GN Datasheet

4 Basic type digital temperature controller E5GN
Models with One Control Output and a 24-VAC/VDC Power Supply
Case color
Control
output
Control
mode
*1
*1.
If heating/cooling control mode is used, an auxiliary output is used as a control output for the cooling side. The number of auxiliary outputs that can be used will
decrease by one. Also, the signal for the control output for the cooling side will be a relay output.
No. of
auxiliary
outputs
Detection
of heater
burnout,
SSR
failure, and
heater
overcurrent
No. of
event
inputs
Transfer
output
*2
*2.
A current control output can be used as the transfer output. In that case, an auxiliary output is used as the control output. The control output will be a relay output.
The number of auxiliary outputs that can be used will decrease by one.
Communi-
cations
*3
*3.
RS-232-C communication models available on request.
Previous model
New model
Thermo-
couple
input
Resistance
thermo-
meter
input
Black
Relay
output
Standard or
heating/
cooling
1
---
---
---
---
E5GN-R1TC E5GN-R1P E5GN-R1TD-C
2 --- --- E5GN-R1BTD-C
---
RS-485
E5GN
-R03TC-FLK
E5GN
-R03P-FLK
E5GN
-R103TD-C-FLK
2
---
--- --- E5GN-R2TD-C
Detection
for single-
phase
heaters
--- --- E5GN-R2HTD-C
---
2 --- --- E5GN-R2BTD-C
--- RS-485 --- ---
E5GN
-R203TD-C-FLK
Voltage
output
(for driving
SSR)
Standard or
heating/
cooling
1
---
---
---
---
E5GN-Q1TC E5GN-Q1P E5GN-Q1TD-C
2 --- --- E5GN-Q1BTD-C
---
RS-485
E5GN
-Q03TC-FLK
E5GN
-Q03P-FLK
E5GN
-Q103TD-C-FLK
2
---
--- --- E5GN-Q2TD-C
Detection
for single-
phase
heaters
--- --- E5GN-Q2HTD-C
---
2 --- --- E5GN-Q2BTD-C
--- RS-485 --- ---
E5GN
-Q203TD-C-FLK
Current
output
Standard or
heating/
cooling
1---
---
Transfer
output using
control
output
---
--- --- E5GN-C1TD-C
2 --- --- E5GN-C1BTD-C
--- RS-485 --- ---
E5
GN
-C10
3TD-C-FLK
H07E-EN-01+E5GN+Datasheet.fm Seite 4 Mittwoch, 18. November 2009 4:41 16

Omron E5GN Specifications

General

Brand	Omron
Model	E5GN
Category	Temperature Controller
Language	English