What to do if I see a memory error on my Omron Temperature Controller?
If you encounter a memory error on your Omron Temperature Controller, first turn the power off and then back on. If the display remains the same, the unit requires repair. However, if the display is restored, investigate potential external noise affecting the control system.
What to do if my Omron E5GN Temperature Controller displays an HB error?
If your Omron Temperature Controller shows an HB error, begin by turning the power off, then on again. Should the display persist with the same error, the controller needs repair. If the display returns to normal, examine the system for electrical noise.
How to troubleshoot an input error on an Omron Temperature Controller?
If you're experiencing an input error with your Omron Temperature Controller, check the wiring of the inputs for any miswiring, disconnections, or short-circuits. Also, verify the input type.
General| Size | 48 x 48 mm |
|---|---|
| Number of Control Outputs | 1 |
| Number of Alarms | 2 |
| Type | Temperature Controller |
| Control Method | ON/OFF, PID control |
| Input Type | Thermocouple, RTD, Analog Current, Analog Voltage |
| Output Type | Relay, Voltage (for SSR drive), Current |
| Display | LED |
| Power Supply | 100-240 VAC |
| Communication | RS-485 (optional) |
| Control Output | Relay, Voltage (for SSR drive), Current |
| Alarm Output | Relay |
| Ambient Operating Temperature | -10 to 55 °C |
| Ambient Operating Humidity | 25 to 85% RH (non-condensing) |
| Protection Rating | IP66 |
| Dimensions | 48 x 48 x 78 mm |
| Weight | Approx. 200 g |
To Next Page
