Omron FH-L550 - Lighting and Lighting Controller

Touch Panel Monitor and Cables
Appear-
ance
Description Model
Touch Panel Monitor 12.1 inches (for FH Sensor Controllers)
*1
FH-MT12
*1. FH Series Sensor Controllers version 5.32 or higher is required.
Appear-
ance
Description Model
DVI-Analog Conversion Cable for Touch Panel Monitor
Cable length: 2 m, 5 m or 10 m
FH-VMDA £M
*1
RS-232C Cable for Touch Panel Monitor
Cable length: 2 m, 5 m or 10 m
XW2Z-££
£PP-1
*2
USB Cable for Touch Panel Monitor
Cable length: 2 m or 5 m
FH-VUAB £M
*1
*1.
Insert the cables length into £ in the model number as follows. 2 m = 2, 5 m = 5, 10 m = 10
*2.
Insert the cables length into £££ in the model number as follows. 2 m = 200, 5 m = 500, 10 m = 010.
LCD Monitor and Cable
Appear-
ance
Description Model
LCD Monitor 8.4 inches for Box-type Controllers
*1
FZ-M08
LCD Monitor Cable
When you connect a LCD Monitor FZ-M08 to FH sensor controller
, please use
it in combination with a DVI-I -RGB Conversion Connector FH-VMRGB.
FZ-VM 2M
FZ-VM 5M
DVI-I -RGB Conversion Connector FH-VMRGB
*1. It can be used in FH series.
1-2-4
Lighting and Lighting Controller
Appear-
ance
Description Model
-
External Lighting - FLV Series
- FL Series
Lighting Control-
ler (Required to
control external
lighting from a
Controller)
For FLV-Series Camera Mount Lighting Controller FLV-TCC Series
Analog Lighting Controller FLV-ATC Series
For FL-Series Camera Mount Lighting Controller FL-TCC Series
For the method of setting the lighting controller, please refer to the respective instruction manual.
1 Confirm the Package
1-8
FH Series Vision System Hardware Setup Manual (Z366-E1)