Omron FH-L550

2-1-2
FH-1000/FH-2000/FH-3000/FH-5000 Series
Vision System FH-1000/2000/3000/5000 series is the BOX type Sensor Controller having functions
and high-speed needed to incorporate with a machine, and safety
, reliability, and maintainability as an
industrial controller.
This series includes the conventional image processing functions and added functions needed to in-
corporate with a machine. As Sensor Controller supporting high-speed communications, with Ether-
CAT, it enables synchronous control with connecting to input and output devices such and a program-
mable controller.
This series can connect with up to eight cameras and transmits images faster than that in the conven-
tional models.
OMRON provides Sysmac device designed by unified communication specifications and User Inter-
face Specifications. Vision System FH-1000/2000/3000/5000 series can be easily connected with
NJ/NX/NY-series Controller and Sysmac devices such as EtherCAT slaves by using the automation
software Sysmac Studio and which are designed to meet the optimum functions and operations.
The example of a system configuration is shown below.
EtherCAT Connection for FH Series
Example of the FH Sensor Controllers (4-camera type)
Sysmac Studio
Standard Edition
Vision Edition
EtherCAT Cables
*1
EtherCAT junction slaves
Ethernet Cables
*2
Vision System
FH Sensor Controllers
Cameras
special cable for cameras
Another slave
(With built-in EtherCAT slave function)
EtherCAT Cables
*1
NJ/NX/NY-series
Controller
Incremental
rotary encoder
special cable
special cable for Touch Panel Monitor
cable tor Touch Panel interface
special cable for I/O
Touch Panel Monitor
FH-MT12
PLC for
I/O control
Trigger input
sensor
Lighting
Controllers
Lighting
Controllers
External
Lightings
*1. To use STP (shielded twisted-pair) cable of category 5 or higher with double shielding (braiding
and aluminum foil tape) for EtherCA
T and RJ45 connector.
*2. To use STP (shielded twisted-pair) cable of category 5 or higher for Ethernet and RJ45 connector.
2 Overview of FH series
2-4
FH Series Vision System Hardware Setup Manual (Z366-E1)