Omron FH-L550

2-3
Flow of Use Procedure
The following table shows the flow for using the FH.
Procedure Description Reference
Preparations Installation and Wiring Section 4 Handling and Installation Envi-
ronment on page
4-1
Section 5 Setup and Wiring on page
5-1
↓
Turning ON Power 5-1 When turning ON and OFF on page
5-2
↓
Language Selection in Dialog Box (only
when the Sensor Controller is started for
the first time)
Vision System FH/FHV series User's
Manual (Cat.No. Z365)
↓
Main Window (Layout 0) Display Vision System FH/FHV series User's
Manual (Cat.No. Z365)
↓
Camera Adjustments (Display the settings
dialog box for a Camera Image Input proc-
essing item.)
Vision System FH/FHV series User's
Manual (Cat.No. Z365)
↓
Select T
ool - System settings, and then
under Startup setting, set the settings for
Basic, Communication, and Operation
mode.
Vision System FH/FHV series User's
Manual (Cat.No. Z365)
↓
Click the Data save button, and then select
Function - System restart.
Vision System FH/FHV series User's
Manual (Cat.No. Z365)
↓
Select T
ool - System settings, and then
set the settings for Camera,
Communication and Other.
Vision System FH/FHV series User's
Manual (Cat.No. Z365)
↓
Click the Data save button. Vision System FH/FHV series User's
Manual (Cat.No. Z365)
↓
Scene Editing In the Main Window (layout 0), edit the
measurement flow
.
• Register processing items.
• Set the properties for each processing
item.
Vision System FH/FHV series User's
Manual (Cat.No. Z365)
↓
Click the Data save button. Vision System FH/FHV series User's
Manual (Cat.No. Z365)
↓↑
2 Overview of FH series
2-8
FH Series Vision System Hardware Setup Manual (Z366-E1)