Omron FH-L550

1-2-5
Accessories
Appear-
ance
Description Model
USB flash drive 2 GB FZ-MEM2G
8 GB FZ-MEM8G
SD card 2 GB HMC-SD291
4 GB HMC-SD491
USB/Monitor Switcher FZ-DU
-
Mouse - Driverless wired mouse
(A mouse that requires the mouse driver to be installed is not supported.)
-
EtherCAT junction
slaves
3 ports Power supply voltage:
20.4 VDC to 28.8 VDC
(24 VDC -15 % to +20
%)
Current
consump-
tion: 0.22
A
GX-JC03
6 ports GX-JC06
Industrial Switching
Hubs for EtherNet/IP
and Ethernet
3 ports Failure detection: None Current
consump-
tion: 0.22
A
W4S1-03B
5 ports Failure detection: None W4S1-05B
Failure detection: Sup-
ported
W4S1-05C
- Calibration Plate FZD-CAL
Common items related
to DIN rail (for FH-
L550/-L550-10)
DIN rail mounting bracket FH-XDM-L
DIN 35
mm rail
• Length:
75.5/95.5/1
15.5/200
cm
• Height: 7.5 mm
• Material: Iron
• Surface: Conductive
PHOENIX
CONTACT
NS 35/7.5 PERF
• Length:
75.5/95.5/1
15.5/200
cm
• Height: 15 mm
• Material: Iron
• Surface: Conductive
NS 35/15 PERF
End plate Need 2 pieces each
Sensor Controller
PHOENIX
CONT
ACT
CLIPFIX 35
1 Confirm the Package
1-9
FH Series Vision System Hardware Setup Manual (Z366-E1)
1-2 Sold Separately
1
1-2-5 Accessories