LED name Description
(A) PWR LED Lit while power is ON.
(B) ERROR LED Lit when an error has occurred.
(C) RUN LED Lit while the layout turned on output setting is displayed.
(D) ACCESS LED Blinks while the internal nonvolatile memory is accessed.
(E) SD PWR LED Lit while power is supplied to the SD memory card and the card is usable.
(F) SD BUSY LED Blinks while the SD memory card is accessed.
(G) Ethernet NET
RUN LED
Lit while Ethernet communications are usable.
(H) Ethernet
LINK/ACT LED
Lit when connected with an Ethernet device, and blinks while performing com-
munications.
3 Configuration
3-20
FH Series Vision System Hardware Setup Manual (Z366-E1)
To Next Page
Loading...
