Omron fh series Construction Guide

92
* When using the FHV Series
Smart Camera Vision Sensor,
you can use the Simulation
Software to load a settings data
file that has been saved for
backup. This will allow you to
launch the "Calibration Support
Tool" from the "Tool" menu. For
additional information on
backing up settings data,
please refer to Section 6.5
5
Remove the calibration target
from the robot.

Omron fh series Specifications

General

Type	Machine Vision System
Series	FH Series
Power Supply	24 VDC
Storage Temperature	-20 to 60°C
Humidity	35 to 85% RH (non-condensing)
Image Sensor	CMOS
Processing Speed	High-speed processing
Connectivity	Ethernet
I/O	Digital I/O
Operating System	Embedded OS
I/O Ports	Ethernet, USB