19
When necessary
9. Selecting Your Personal Number and Taking a
Measurement
If your personal number is not recognized frequently, you can select your personal number and take
the measurement as follows.
1
With the panel unit inside the main unit,
Press power switch to turn on the power
•
After the display of
current
date, it will display "0.0 kg",
" " and " " will blink.
2
Select your personal number
Press the button to select your personal number
(
~
).
When "BirthDate
(
)
" is displayed,
•
Your personal data has not been registered
in your personal number.
•
Register your personal data.
(
P7, P9
)
3
Press the
button to confirm the personal number
•
"0.0 kg" is displayed.
4
After "0.0 kg" is displayed,
Take out the panel unit
5
Taking a Measurement
•
Please refer to step 3 of section 6.
Please confirm the measurement method is
correct before starting measurement
(
P11
)
90°
6
After Checking the Measurement Results,
Press the power switch to turn off the power
•
Please insert the panel unit into the main unit.
(
P25
)
•
The power turns off if the unit is not used for 3 minutes.
To Next Page
Loading...
