32
3. Using the Unit
3. Press the MEMORY button ( ) to display the most
recent set of individual measurement values on the
screen. The values are displayed from the most recent to
the oldest.
Note: The date and time
are alternately
displayed with the
measurement
values.
Press the MEMORY
button to display the next set of values.
Press and hold the MEMORY button to display the values
faster.
Auto mode
The average for the consecutive measurements appears
on the display with the auto mode symbol ( ). To
display the values for the individual measurements press
the SET button while the average is displayed.
4. Press the START/STOP button to turn the unit off.
Alternating display
HEM-7080-C1_B_M.fm Page 32 Tuesday, March 9, 2010 9:05 AM
To Next Page
Loading...
